European Paints

EURO PRIMIN

Interior Primer

EUROPRIMIN is a pigmented water-borne Acrylic Interior Primer/sealer with good sealing, binding and alkali Resistance Properties.

Area of Use: Interior: Walls, ceilings, partitions, etc.
Substrates: Concrete, Masonry, woodwork, cement rendering, asbestos, etc.

TDS

01. PHYSICAL CONSTANTS:

Color: White
Finish: Flat
Volume Solids: 32%
Theoretical Spreading Rate: 8.7 m² / liter-30 microns*
Specific Gravity: 1.2
Dry to Touch: 30 minutes (30°C)

02. APPLICATION DETAILS:

Application Method: Brush / roller Conventional spray Airless spray
Thinner (max. vol.): Fresh water (5 to 10%)
Cleaning of Tools: Fresh water
Recoat Interval (min): 1 hour (30°C)
Recoat Interval (max): None

Surface condition: The surface should be stable, firm, dry and free from dust, sand, loose old paint, laitance, dirt, grease and oil. Drying data given is on the assumption that proper ventilation is provided

*The practical spreading rate has been calculated theoretically for application on primed and smooth surface. The actual rates may differ significantly as the primer/sealer is intended to be applied on rough and porous substrates. The actual rates will also depend on the extent of thinning and the application method and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances

Safety: Handle with care. Before and during use, observe all safety labels on packaging and paint containers. Read EUROPEAN PAINTS Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas./li>

EURO PRIMEX

Exterior Primer

EUROPRIMEX is a pigmented water-borne Acrylic Exterior Primer / sealer with good sealing, binding and alkali resistance properties.

Area of Use: Interior: Walls, ceilings, partitions, etc.
Substrates: Concrete, Masonry, woodwork, cement rendering, asbestos, etc.

TDS

01. PHYSICAL CONSTANTS:

Color: White / As per European’s Shade Card
Finish: Flat / Glossy
Volume Solids: 32%
Theoretical Spreading Rate: 8.1 m² / liter-30 microns*
Specific Gravity: 1.3
Dry to Touch: 30 minutes (30°C)

02. APPLICATION DETAILS:

Application Method: Brush / roller Conventional spray Airless spray
Thinner (max. vol.): Fresh water (0 to 5%)
Cleaning of Tools: Fresh water
Recoat Interval (min): 1 hour (30°C)
Recoat Interval (max): None

Surface condition: The surface should be stable, firm, dry and free from dust, sand, loose old paint, laitance, dirt, Greece and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats.
Filling: Interior: EUROWALLPRO
Sealing: Interior: EURO PRIMIN
Remarks: Use only where application and drying can proceed at temperatures above 5°C, preferable above 10°C and relative humidity below 85%.
Safety: Handle with care. Before and during use, observe all safety labels on packaging and paint containers. Read EUROPEAN PAINTS Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas

EURO PRIMESTAR

Int./Ext. Primer

EURO PRIMESTAR is a pigmented water-borne Acrylic Interior Exterior Primer / sealer with good sealing, binding and alkali resistance properties.

Area of Use: Interior: Walls, ceilings, partitions, etc.
Substrates: Concrete, Masonry, woodwork, cement rendering, asbestos, etc.

TDS

01. PHYSICAL CONSTANTS:

Color: White / As per European’s Shade Card
Finish: Flat / Glossy
Volume Solids: 32%
Theoretical Spreading Rate: 8.1 m² / liter-30 microns*
Specific Gravity: 1.3
Dry to Touch: 30 minutes (30°C)

02. APPLICATION DETAILS:

Application Method: Brush / roller Conventional spray Airless spray
Thinner (max. vol.): Fresh water (0 to 5%)
Cleaning of Tools: Fresh water
Recoat Interval (min): 1 hour (30°C)
Recoat Interval (max): None

Surface condition: The surface should be stable, firm, dry and free from dust, sand, loose old paint, laitance, dirt, Greece and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats.
Filling: Interior: EUROWALLPRO
Sealing: Interior: EURO PRIMIN
Remarks: Use only where application and drying can proceed at temperatures above 5°C, preferable above 10°C and relative humidity below 85%.
Safety: Handle with care. Before and during use, observe all safety labels on packaging and paint containers. Read EUROPEAN PAINTS Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas

Contact Info

Primer

EURO PRIMIN

EURO PRIMEX

EURO PRIMESTAR

Links

Products

Contact Us

Locations

Email Us

Phone Us

Location Map